Our Gallery

Our Contacts

27 Division St, New York, NY 10002, USA

iRecco@mail.com energy.IRecco@mail.com

+1 (800) 123 456 789
+1 (800) 321 456 746

Category: PV Panel


How the solar cell works

Simply put, a solar panel works by allowing photons, or particles of light, to knock electrons free from atoms, generating a flow of electricity. Solar panels actually comprise many, smaller units called photovoltaic cells. (Photovoltaic simply means they convert sunlight into electricity.) Many cells linked together make up a solar panel.

Each photovoltaic cell is basically a sandwich made up of two slices of semi-conducting material, usually silicon — the same stuff used in microelectronics.

To work, photovoltaic cells need to establish an electric field. Much like a magnetic field, which occurs due to opposite poles, an electric field occurs when opposite charges are separated. To get this field, manufacturers “dope” silicon with other materials, giving each slice of the sandwich a positive or negative electrical charge.

Specifically, they seed phosphorous into the top layer of silicon, which adds extra electrons, with a negative charge, to that layer. Meanwhile, the bottom layer gets a dose of boron, which results in fewer electrons, or a positive charge. This all adds up to an electric field at the junction between the silicon layers. Then, when a photon of sunlight knocks an electron free, the electric field will push that electron out of the silicon junction.


A couple of other components of the cell turn these electrons into usable power. Metal conductive plates on the sides of the cell collect the electrons and transfer them to wires. At that point, the electrons can flow like any other source of electricity.

Recently, researchers have produced ultrathin, flexible solar cells that are only 1.3 microns thick — about 1/100th the width of a human hair — and are 20 times lighter than a sheet of office paper. In fact, the cells are so light that they can sit on top of a soap bubble, and yet they produce energy with about as much efficiency as glass-based solar cells, scientists reported in a study published in 2016 in the journal Organic Electronics. Lighter, more flexible solar cells such as these could be integrated into architecture, aerospace technology, or even wearable electronics.  

There are other types of solar power technology — including solar thermal and concentrated solar power (CSP) — that operate in a different fashion than photovoltaic solar panels, but all harness the power of sunlight to either create electricity or to heat water or air.

Credit : https://www.livescience.com/41995-how-do-solar-panels-work.html


Invisible Solar Panels

How Tomorrow’s Windows Will Generate Electricity

A new study led by scientists from Incheon National University in Korea shows how to make a fully transparent solar cell.

In a new study in Journal of Power Sources, an international team of researchers, led by Prof. Joondong Kim from Korea, demonstrate the first transparent solar cell. Their innovative technique rests on a specific part of the solar cell: the heterojunction, made up of thin films of materials responsible for absorbing light. By combining the unique properties of titanium dioxide and nickel oxide semiconductors, the researchers were able to generate an efficient, transparent solar cell.

Five years after the Paris climate agreement, all eyes are on the world’s progress on the road to a carbon-free future. A crucial part of this goal involves the energy transition from fossil fuels to renewable sources, such as sun, water, wind and wave energy. Among those, solar energy has always held the highest hope in the scientific community, as the most reliable and abundant energy source on Earth. In recent decades, solar cells have become cheaper, more efficient, and environmentally friendly. However, current solar cells tend to be opaque, which prevents their wider use and integration into everyday materials, constrained to being lined up on roofs and in remote solar farms.

But what if next-generation solar panels could be integrated to windows, buildings, or even mobile phone screens? That is the hope of Professor Joondong Kim from the Department of Electrical Engineering at Incheon National University, Korea. In a recent study published in Journal of Power Sources, he and his colleagues detail their latest invention: a fully transparent solar cell. “The unique features of transparent photovoltaic cells could have various applications in human technology,” says Prof. Kim.

The idea of transparent solar cells is well known, but this novel application where scientists have been able to translate this idea into practice is a crucial new finding. At present, the materials making the solar cell opaque are the semiconductor layers, those responsible for capturing light and translating it into an electrical current. Hence, Prof. Kim and his colleagues looked at two potential semiconductor materials, identified by previous researchers for their desirable properties.

The first is titanium dioxide (TiO2), a well-known semiconductor already widely used to make solar cells. On top of its excellent electrical properties, TiO2 is also an environment-friendly and non-toxic material. This material absorbs UV light (a part of the light spectrum invisible to the naked eye) while letting through most of the visible light range. The second material investigated to make this junction was nickel oxide (NiO), another semiconductor known to have high optical transparency. As nickel is one of the mist abundant elements on Earth, and its oxide can easily be manufactured at low industrial temperatures, NiO is also a great material to make eco-friendly cells.

Credit : https://scitechdaily.com/